Zhejiang Jiuce Intelligent electric co., ltd.
CJ19 Changeover capacitor Ac contactor
CJ19 series switching capacitor contactor are used to switch low voltage shunt capacitors. They are widely used in reactive power compensation equipment with 380V 50hz.
1. Used to switch low voltage shunt capacitor
2. Widely used in reactive power compensation equipment with 380V 50hz
3. With a device to restrain inrush current, effectively reduce the impact of Closing inrush current on the capacitor
4. Small size, light weight, strong on-off capacity and easy installation
5. Specification: 25A 32A 43A 63A 85A 95A
Introduction:
CJ19 Series changeover capacitor contactor is especially used for low voltage shunt capacitor switching. And it widely used in reactive power compensation equipment in which AC 50HZ, voltage 380V, inrush current system in the contactor can decrease shock to capacitor and lower switching overvaluation while breaking a circuit.Moreover, It can replace transfer device which are composed of one contractor and three current limiting reactors, small, light, joins convenient and reliable, high capacity of turning on/off.
These series contactor conforms to IEC60947-4-1 standard.
CJ19 series AC Contactor is suitable for using in the circuits the rated voltage up to 400V AC 50Hz or 60Hz. CJ19 is used to combine with low voltage reactive power compensators or cut off low voltage shunt capacitor. CJ19 series AC Contactor has restraining device to effectively decrease impact caused by inrush transient current when switch on or over voltage when switch off.
Product Description：
Normal Running And Installation Conditions:
1. Ambient air temperature: -5℃+40℃. the average value should not exceed +35℃ within 24 hours
2. Elevation: at most 2000m.
3.Atmospheric conditions: When the temperature at 40℃,the relative humidity of atomsphere should be
at the most 50%. When at relatively low temperatures, it could have higher relative humidity. Monthly maximum relative humidity could be not more than 90%.Special measures should be taken due to occurrence of dews
4. Class of pollution:Class 3
5. Installation category: Ⅲ
6. Installation conditions: Degree of inclination between fitting surface and vertical surface should not exceed II
7. Impact shock: Product should be installed and used in the place where often shakes and impacts.
The most important features
1.The contactor is of directly acting dual-break structure,acting mechanism is agile,easy to check by hand,compact structure convenient to replace contacts.
2.Wiring terminal block protected by cover,safe and reliable.
3.It can be mounted by screws,or on 35/75mm standard rail.
4.Complies with IEC60947-4-1
| Items | CJ19-25 | CJ19-32 | CJ19-43 | CJ19-63 | CJ19-95 | CJ19-115 | CJ19-150 | CJ19-170 |
| Controllable capacitor 220V | 6 | 9 | 10 | 15 | 28.8(240V） | 34.(240V） | 46(240V） | 52(240V） |
| Capacity 380V | 12 | 18 | 20 | 30 | 50(400V） | 60(400V） | 80(400V | 90(400V） |
| Rated 1solation Voltage Ui V |
500 | 690 | ||||||
| Rated Operational Voltage Ue V |
220/240+ 380/400 | |||||||
| Conventional thermal current 1th A | 25 | 32 | 43 | 63 | 95 | 200 | 200 | 275 |
| Rated Operational current 1eA (380V） | 17 | 23 | 29 | 43 | 72.2 (400V） | 87 (400V） | 115(400V） | 130(400V） |
| Restrained surge capacity | 20 1e | |||||||
| Controlled power voltage | 110 127 220 380 | |||||||
| Auxiliary contact | AC.15: 360VA DC.13: 33W 1th:10A | |||||||
| Operating Frequency cycles/h | 120 | |||||||
| Electrical durability 104 | 10 | |||||||
| Mechanical durability 104 | 100 | |||||||
| Model | Amax | Bmax | Cmax | Dmax | E | F | Note | |
| CJ19-25 | 80 | 47 | 124 | 76 | 34/35 | 50/60 | Not only fixed by screws but also could be fixed with 35mm din rail |
|
| CJ19-32 | 90 | 58 | 132 | 86 | 40 | 48 | ||
| CJ19-43 | 90 | 58 | 136 | 86 | 40 | 48 | ||
| CJ19-63 | 132 | 79 | 150 | . | . | . | Not only fixed by screws but also could | |
| CJ19-95 | 135 | 87 | 158 | . | . | . | be fixed with 35mm and 75mm din rail | |
| CJ19-115 | 200 | 120 | 192 | 155 | 115(400V） | |||
| CJ19-150 | 200 | 120 | 192 | 155 | Not only fixed by screws but also could | |||
| CJ19-170 | 200 | 120 | 192 | 155 | be fixed with two 35mm din rail | |||
| 6. wiring and installation | ||||||||
| 6.1 The connection terminals are protected through insulation cover+ which is reliable and secure for installation and operation: | ||||||||
| 6.2 For CJ19.25λ43+ screws are available for installation+ as well as the D1N rail: | ||||||||
| for CJ19.63λ95+ 35mm or 75mm standard rail are available for installation. | ||||||||
| for CJ19.115λ170+ screws are available for installation+ as well as two 35mm D1N rail. | ||||||||
