Zhejiang wanlai Intelligent electric co., ltd.
JC3BE-DC DC Miniature Circuit Breaker
JC3BE-DC High-Performance DC Circuit Breaker
Engineered for superior protection in high-voltage DC applications up to 1000V.
Breaking capacity up to 10kA
Rated current up to 63A
Rated voltage up to 1000V DC
1 Pole, 2 Pole, 3 Pole , 4 Pole are available
Advanced Short-Circuit & Overload Protection
Clear Contact Indicator for safe status confirmation
IEC 60947-2 Certified
The ultimate choice for efficiency and safety in your DC infrastructure.
JC3BE-DC High-Performance DC Circuit Breaker
Engineered for superior protection in high-voltage DC applications up to 1000V.
Breaking capacity up to 10kA
Rated current up to 63A
Rated voltage up to 1000V DC
1 Pole, 2 Pole, 3 Pole , 4 Pole are available
Advanced Short-Circuit & Overload Protection
Clear Contact Indicator for safe status confirmation
IEC 60947-2 Certified
The ultimate choice for efficiency and safety in your DC infrastructure.
Product Details
Introduction
JC3BE-DC miniature DC circuit breaker is designed for solar / photovoltaic PV system, energy storage and other direct current DC applications.They are mainly placed between batteries and hybrid inverters.
JC3BE-DC DC circuit breaker is a protective device equipped with both a thermal that is available in 1 pole ,2pole, 3 pole and 4 pole versions. The switching capacity is 10kA according to IEC/EN 60947-2. The DC rated voltage is 250V per pole, rated voltage up to 1000V DC.
JC3BE-DC circuit breaker is available with rated currents of 2A to 63A.
JC3BE-DC circuit breaker offer new features, better connection, superior performance and increased levels of security. Its breaking capacity is up to 10kA.
JC3BE-DC dc circuit breaker can be locked (by a padlocking device) in OFF position as a safety measure for removal of the PV inverter
Since a fault current can flow in the reverse direction to the operating current, the JC3BE-DC Circuit breaker can detect and protect against any bidirectional current. To ensure the safety of the installation, it is necessary, depending on the various types of application, to combine the circuit breaker with:
• a residual current device at the AC end,
• a fault passage detector (insulation monitoring device) at the DC end
• an earth protection circuit breaker at the DC end
In all cases, fast action on site will be required to clear the fault (protection not ensured in the event of a double fault). The circuit breaker is: delivered with three inter-pole barrier to provide increased isolation distance between two adjacent connectors
The most important features:
JC3BE-DC circuit breaker for DC applications
Non-polarity, Easy wiring
Rated voltage up to 1000V DC
Rated switching capacity 10 kA according to IEC/EN 60947-2
Insulation voltage Ui 1000V
Rated impulse withstand voltage Uimp (V) 4000V
Back-up fuse with high selectivity, thanks to low let-through energy
Contact position indicator red – green
Rated currents up to 63A
Available in1 Pole, 2 Pole, 3 Pole and 4 Pole
1 Pole=250Vdc, 2 Pole=500Vdc, 3 Pole=750Vdc, 4 Pole=1000Vdc
Compatible with Cable PIN or U type standard busbars
Designed for Solar, PV, energy storage and other DC applications
The housing is made of high flame-retardant PA nylon, effectively preventing accidental fires.
Technical Data:
| Standard | IEC/EN 60947-2 | |
| Electrical features | Rated current In(A) | 2, 4, 6, 10, 16, 20, 25, 32, 40, 50, 63 |
| Rated voltage Ue(V) | 1P:DC250V, 2P:DC500V, 3P:DC750V, 4P:DC1000V | |
| Insulation voltage Ui(V) | 1000V | |
| Rated impulse withstand voltage Uimp(V) | 4000V | |
| Rated breaking capacity | 10KA | |
| Rated impulse withstand voltage (1.2/50) Uimp (V) | 4000 | |
| Pollution degree | 2 | |
| Thermo-magnetic release characteristic | B Curve, D Curve | |
| Mechanical features | Electrical life | ≥1500 |
| Mechanical life | ≥20000 | |
| Contact position indicator | Yes | |
| Protection degree | IP20 | |
| Reference temperature for setting of thermal element(℃) | 30 | |
| Ambient temperature(with daily average≤35℃) | -5…+40℃ | |
| Storage temperature | -25…+70℃ | |
| Installation | Terminal connection type | Cable/U-type busbar/Pin-type busbar |
| Terminal size top/bottom for cable | 25mm2 / 18-4 AWG | |
| Terminal size top/bottom for busbar | 10mm2 / 18-8AWG | |
| Tightening torque | 2.5N*M / 22 In-lbs | |
| Mounting | On DIN rail EN 60715(35mm) | |
| Combination with accessories | Auxiliary contact | Yes |
| Shunt release | Yes | |
| Under voltage release | Yes | |
| Alarm contact | Yes | |
