• JC3RH-EV Residual Current Device
  • JC3RH-EV Residual Current Device
  • JC3RH-EV Residual Current Device
  • JC3RH-EV Residual Current Device
  • JC3RH-EV Residual Current Device
  • JC3RH-EV Residual Current Device

JC3RH-EV Residual Current Device

Electromagnetic Type
Earth Leakage Protection
Breaking capacity 6KA,10KA
Rated current up to 100A
Detect smooth DC 6mA residual currents
Tripping sensitivity: 30mA
Connection from top or bottom
Complies with IEC61008-1, IEC62955

Features
Electromagnetic Type
Earth Leakage Protection
Breaking capacity 6KA,10KA
Rated current up to 100A
Detect smooth DC 6mA residual currents
Tripping sensitivity: 30mA
Connection from top or bottom
Complies with IEC61008-1, IEC62955

Application
JC3RH-EV is a residual current circuit breaker that detects both AC and smooth DC fault currents, providing protection against the "blinding" effect of a smooth DC current on a standard Type A RCD. It's specifically designed for individual EV chargers and trips if a smooth DC residual current exceeds 6mA, as it integrated a Residual Direct Current Detecting Device

Standard IEC61009-1, IEC62955
Electrical features Type(wave from of the earth leakage sensed) EV(A+DC leakage current)
  Rated current In (A) 40, 63
  Poles 1P+N, 3P+N
  Rated voltage Ue (V) 1P+N: 230/240 3P+N: 400/415
  Rated sensitivity IΔn 0.03mA
  DC tripping threshold IΔdc 6mA
  Insulation voltage Ui (V) 500
  Rated residual making and breaking capacity IΔm 500(In=25A/40A), 630(In=63A)
  Rated frequency 50Hz
  Rated breaking capacity 10KA
  SCPD fuse 10000A
  Break time under IΔn 0.1s
  Rated impulse withstand voltage (1.2/50) Uimp (V) 4,000
  Dielectric test voltage at ind.Freq. for 1 min (KV) 2.5
  Pollution degree 2
Mechanical features Electrical life 2,000
  Mechanical life 4,000
  Contact position indicator Yes
  Protection degree IP20
  Reference temperature for setting of thermal element() 30
  Ambient temperature(with daily average 35) -5+40
  Storage temperature() -25+70
Installation Terminal connection type Cable/U-type busbar/Pin-type busbar
  Terminal size top/bottom for cable 25mm2/18-3AWG
  Terminal size top/bottom for Busbar 10mm2/18-8AWG
  Tightening torque 2.5N*m/22In-lbs
  Mounting On DIN rail EN 60715(35mm)
  Connection From top or bottom are available

Message us