Zhejiang wanlai Intelligent electric co., ltd.
JC3LFD 1P+N mini AFDD single Module 6KA
Electronic Type
Residual current (rcd) protection
Breaking capacity6KA
Rated current up to 40A (available from 2A to 40A)
Type A or Type AC are available
Tripping sensitivity : 30mA, 100mA Or 300mA
Connection from bottom
Double pole switching for complete isolation of faulty circuits
Neutral pole switching significantly educes the installation and commissioning test time
Complies with IEC61009-1, EN61009-1
Features
Electronic Type
Residual current (rcd) protection
Breaking capacity6KA
Rated current up to 40A (available from 2A to 40A)
Type A or Type AC are available
Tripping sensitivity : 30mA, 100mA Or 300mA
Connection from bottom
Double pole switching for complete isolation of faulty circuits
Neutral pole switching significantly educes the installation and commissioning test time
Complies with IEC61009-1, EN61009-1
Application
The JC3LFD RCBOs(residual current circuit breaker with overload protection) are suitable for consumer units or distribution boards,applied under occasions such as industrial, and commercial,high-rise buildings and residual houses
Switched Live and Neutral
JC3LLFD RCBO with switched neutral built in as standard will fully isolate a faulty or damaged circuit by disconnecting live and neutral conductors. They offers the most comprehensive circuit protection available
Technical Data:
| Product code | JC3LFD | |
| Standard | IEC61009-1, EN61009-1 | |
| Electrical features | Rated current In(A) | 2, 4, 6, 10, 16, 20, 25, 32, 40 |
| Type | Electronic | |
| Type(wave form of the earth leakage sensed) | A or AC are available | |
| Poles | 1P+N(Switched Live and Neutral) | |
| Rated voltage Ue(V) | 230/240 | |
| Rated sensitivity I▲n | 30mA, 100mA, 300mA | |
| Insulation voltage Ui(v) | 500 | |
| Rated frequency | 50/60Hz | |
| Rated breaking capacity | 6KA | |
| Rated residual making and breaking capacity I▲m(A) | 3000 | |
| Rated impulse withstand voltage(1.2/50) Uimp(V) | 4000 | |
| Break time under I▲n(s) | ≤0.1 | |
| Dielectric test voltage at ind. Freq. for 1 min(KV) | 2 | |
| Pollution degree | 2 | |
| Thermo-magnetic release characteristic | B, C, D | |
| Mechanical features | Electrical life | 2000 |
| Mechanical life | 10000 | |
| Contact position indicator | Yes | |
| Protection degree | IP20 | |
| Reference temperature for setting of thermal element(℃) | 30 | |
| Ambient temperature(with daily average ≤35℃) | -5…+40 | |
| Storage temperature | -25…+70 | |
| Installation | Terminal connection type | Cable/Pin-type busbar |
| Terminal size top for cable | 10mm2 | |
| Terminal size bottom for cable | 16mm2/18-8 AWG | |
| Terminal size top/bottom for Busbar | 10mm2/18-8 AWG | |
| Tightening torque | 2.5N*m/22In-lbs. | |
| Mounting | On DIN rail EN 60715(35mm) | |
| Connection | From bottom | |
