Hal qayb oo ka mid ah Zhejiang Jiuce Intelligent Electric Co., Ltd.
JCR1-40 Hal Module Mini RCBO oo leh 6kA Toos ah oo Dhexdhexaad ah
JCR1-40 RCBOs (xakamaynta wareegga hadda jirta oo leh ilaalin xad dhaaf ah) waxay ku habboon yihiin qaybaha macaamiisha ama looxyada qaybinta, kuwaas oo lagu dabaqo xaaladaha sida warshadaha, iyo ganacsiga, dhismayaasha dhaadheer iyo guryaha la dego.
Nooca Elektarooniga ah
Ilaalinta hadda jirta
Culays badan iyo ilaalinta wareegga gaaban
Jebinta awoodda 6kA, waxaa loo cusboonaysiin karaa 10kA
Hadda la qiimeeyay ilaa 40A (waxaa laga heli karaa 6A ilaa 40A)
Waxaa lagu heli karaa qalooca B ama C.
Dareenka socodka: 30mA, 100mA, 300mA
Nooca A ama Nooca AC waa la heli karaa
Bedeshay Live iyo Dhexdhexaad
U beddelashada tiir laba jibaaran si loo go'doomiyo wareegyada cilladaysan
Beddelka cirifka dhexdhexaadka ah wuxuu si weyn u yareeyaa rakibidda iyo wakhtiga tijaabada
U hoggaansan IEC 61009-1, EN61009-1
Hordhac:
JCR1-40 RCBO waxay bixisaa ka-hortagga khaladaadka dhulka, culeyska xad dhaafka ah, wareegyada gaaban iyo rakibaadda guriga.RCBO oo leh dhexdhexaad iyo waji labadaba labadaba waxay dammaanad qaadayaan dhaqdhaqaaqeeda saxda ah ee ka dhanka ah ceebaha daadinta dhulka xitaa marka dhexdhexaadka iyo wejiga ay si khaldan isugu xidhan yihiin.
JCR1-40 elektarooniga ah RCBO waxa ay ku daraysaa qalab shaandhaynta ka hortagaysa khataraha aan la rabin sababtoo ah danab ku meel gaadh ah iyo hadda;
JCR1-40 RCBO's waxay isku daraan hawlaha dheeraadka ah ee MCB iyo cilladaha dhulka ee RCD ee hal unug.
JCR1-40 RCBO, kaas oo qabta shaqada RCD iyo MCB labadaba, sidaas awgeed waxay ka hortagtaa carqaladaynta noocaan ah waana in loo adeegsadaa hawlgallada muhiimka ah.
JCR1-40 miniature RCBO's waxay siisaa meelo badan oo fiilooyinka gudaha xayndaabka loogu talagalay rakibaha taasoo ka dhigaysa dhammaan habka rakibidda mid sahlan oo degdeg ah.Inta lagu jiro rakibidda, tijaabinta iska caabinta tooska ah iyo kirishbooyada dhexdhexaadka ah maaha in la gooyo.Hadda oo korodhay heerka badbaadada JCR1-40 RCBO's waxa ku jira dhexdhexaad ahaan heerka caadiga ah.Wareegga cilladaysan ama dhaawacan ayaa si buuxda u go'doonsan iyadoo la jarayo kirishbooyada tooska ah iyo kuwa dhexdhexaadka ah.Wareegyada caafimaadka qaba ayaa ku sii jira adeeg, kaliya wareegga cilladaysan ayaa dansan.Tani waxay ka fogaanaysaa khatarta waxayna ka hortagtaa dhibka haddii ay dhacdo qalad.
Nooca AC RCBOs waxaa loo isticmaalaa ujeedo guud AC (Beddelka Hadda) kaliya wareegyada.Nooca A waxaa loo isticmaalaa ilaalinta DC (Direct Current), kuwan yar yar ee RCBO waxay bixiyaan labada heer ee ilaalinta.
Nooca A JCR1-40 RCBO wuxuu ka jawaabaa labadaba AC iyo qulqulka qulqulka haraaga DC.Waxay ka ilaalisaa qulqulka xad-dhaafka ah labadaba sababtoo ah culeyska xad-dhaafka ah iyo cilladda iyo daadinta dhulka ee hadda jirta.Labada dhacdoba, RCBO waxay joojisaa sahayda korantada ee wareegga si ay uga hortagto burbur ku yimaada rakibaadda iyo aaladaha iyo shoogga koronto ee aadanaha.
B curve JCR1-40 RCBO safarrada u dhexeeya 3-5 jeer culayska buuxo ayaa ku habboon codsiga gudaha.C curve JCR1-40 rcbo safarrada u dhexeeya 5-10 jeer culayska buuxa ee hadda socda ayaa ku habboon codsiyada ganacsiga halkaas oo ay jirto fursad weyn oo ah qulqulka wareegga gaaban ee sare, sida culeyska inductive ama iftiinka fluorescent.
JCR1-40 Waxaa lagu heli karaa qiimeynta hadda ee u dhexeysa 6A ilaa 40A iyo nooca B iyo C ee qalooca.
JCR1-40 RCBO waxay u hogaansantaa BS EN 61009-1, IEC 61009-1, EN 61009-1, AS/NZS 61009.1
Sharaxaada Alaabta
Tilmaamaha ugu muhiimsan
●Tayada sare iyo isku halaynta leh naqshad shaqeynaya iyo rakibid sahlan
●Si loogu isticmaalo guryaha guriga iyo qalabyada la midka ah
●Nooca Elektarooniga ah
●Ilaalinta daadinta dhulka
●Cilmiga xad dhaafka ah iyo ilaalinta wareegga gaaban
●Jabinta awoodda ilaa 6kA
● Hadda la qiimeeyay ilaa 40A (waxaa laga heli karaa 2A, 6A.10A,20A, 25A, 32A, 40A)
●Waxaa laga heli karaa qalooca B ama C
●Dareenka socodka: 30mA,100mA
●Waxa lagu heli karaa Nooca A iyo Nooca AC
●Runtii ka goynta tiirarka labanlaabka ah ee Hal Module RCBO
●Tir laba jibaaran oo loo beddelo si loo go'doomiyo wareegyada cilladaysan
●Beddelida cirifka dhexdhexaadka ah waxay si weyn u yaraynaysaa rakibidda iyo wakhtiga tijaabada
●Dhismaha dahaaran ee ku rakibida baska fudud
●RCBO waxay leedahay calaamad togan oo daar ama damin ah
● 35mm DIN tareen ku dhejinta
●Awoodda qaadida fiilada hadda waa in had iyo jeer ka badataa qiimeynta hadda ee RCBO si looga hortago burbur
●Dabacsanaanta rakibaadda oo leh doorashada isku xirka khadka ama kor ama hoos
●La jaanqaadi kara noocyo kala duwan oo kaashawiito ah oo leh boolal madax oo isku dhafan
●Waxay la kulmeysaa ESV Shuruudaha Tijaabada Dheeraadka ah & Xaqiijinta ee RCBO-yada
●Waxay raacaysaa IEC 61009-1, EN61009-1, AS/NZS 61009.1
Xogta Farsamada
●Heerka: IEC 61009-1, EN61009-1
●Nooca: Electronic
●Nooca (qaabka mawjada dhulka ee daadanaya ayaa la dareemay): A ama AC ayaa diyaar ah
●Tirarka: 1P+N ( 1Mod)
●qiimaynta hadda:2A 6A, 10A, 16A, 20A, 25A, 32A, 40A
●Laanta shaqada lagu qiimeeyay: 110V, 230V ~ (1P + N)
●Dareenka la qiimeeyay I△n: 30mA, 100mA
●Awoodda jabinta la qiimeeyay: 6kA
●Awoodda dahaarka: 500V
● Inta jeer ee la qiimeeyay: 50/60Hz
●Dareenka la qiimeeyay ee u adkaysta (1.2/50): 6kV
● Darajada wasakhowga:2
●Sifada sii daynta thermo-magnetic: qalooca B, qalooca C, qalooca D
●Nolosha makaanikada: 20,000 jeer
●Nolol koronto: 2000 jeer
●Deejada ilaalinta: IP20
● heerkulka deegaanka (oo leh celcelis maalinle ah ≤35℃)：-5℃~+40℃
●Tusaha booska xiriirka: Cagaar=OFF, Casaan=ON
●Nooca isku xirka Terminalka:Cable/U-nooca baska/buska nooca pin-nooca
● Koritaanka: Dusha tareenka DIN EN 60715 (35mm) iyadoo la adeegsanayo qalab degdeg ah
●Xirgaha lagu taliyay: 2.5Nm
●Xiriirka: Laga soo bilaabo gunta
| Heerka | IEC/EN 61009-1 | |
| Koronto Astaamaha | Hadda lagu qiimeeyay gudaha (A) | 6, 10, 16, 20, 25, 32, 40 |
| Nooca | Electronic | |
| Nooca (qaabka mowjadda dhulku ka daadanayo ayaa la dareemay) | A ama AC ayaa diyaar ah | |
| Tiirarka | 1P+N( Toos iyo Dhexdhexaad ah) | |
| Danab lagu qiimeeyay Ue(V) | 230/240 | |
| Dareenka la qiimeeyay I△n | 30mA, 100mA,300mA | |
| Korontada dahaarka Ui (V) | 500 | |
| Inta jeer ee la qiimeeyay | 50/60Hz | |
| Lagu qiimeeyay awooda jabinta | 6kA | |
| Samaynta iyo jabinta awoodda haraaga oo la qiimeeyay I△ (A) | 3000 | |
| Dareenka la qiimeeyay ee u adkeysanaya danabka(1.2/50) Uimp (V) | 4000 | |
| Waqtiga nasashada ee hoos yimaada I△n (s) | ≤0.1 | |
| shahaadada wasakhowga | 2 | |
| Sifada sii daynta Thermo-magnetic | B, C | |
| Makaanik Astaamaha | Nolosha korontada | 2,000 |
| Nolosha makaanikada | 2,000 | |
| Tilmaamaha booska xiriirka | Haa | |
| shahaadada ilaalinta | IP20 | |
| Heerkulka tixraaca ee dejinta curiyaha kulaylka (℃) | 30 | |
| Heerkulka deegaanka (oo leh celcelis maalinle ah ≤35℃) | -5...+40 | |
| Heerkulka kaydinta (℃) | -25...+70 | |
| Rakibaadda | Nooca isku xirka Terminalka | Cable/Pin-nooca baska |
| Cabbirka ugu sarreeya ee fiilada | 10mm2 | |
| Cabbirka meesha ugu hooseeya ee fiilada | 16mm2 / 18-8 AWG | |
| Cabbirka meesha ugu hooseeya ee baska | 10mm2 / 18-8 AWG | |
| Qulqulka adkeynaya | 2.5 N*m / 22 In-Ibs. | |
| Koritaanka | DIN tareenada EN 60715 (35mm) iyadoo la adeegsanayo qalab degdeg ah | |
| Isku xirka | Laga soo bilaabo hoos |
JCR1-40 Cabirka
Waa maxay sababta loo isticmaalo Miniature RCBOs?
RCBO (Hadhaaga Wareegga Wareegga ee hadda jira ee leh ilaalinta xad dhaafka ah) aaladaha waa isku darka RCD (Aaladaha Hadhaaga ah ee hadda jira) iyo MCB (Xarunta Wareegga yar) oo mid ah.
RCD-ku waxa uu ogaadaa Biyo-baxa Dhulka, tusaale ahaan hadda socda meel aanu ahayn, isaga oo daminaya wareegtada halka uu hadda ka jiro cilladda dhulka.Cunsurka RCD ee RCBO wuxuu u jiraa inuu dadka ilaaliyo.
Rakibaadaha guryeynta maaha wax aan caadi ahayn in la helo hal ama in ka badan oo RCDs ah ayaa lala isticmaalaa MCB-yada qaybta macaamiisha, kuwaas oo dhamaantood la isku daray si loo ilaaliyo wareegyada badan.Waxa caadi ahaan dhaca marka uu jiro cilad dhuleed hal wareeg ah waa in koox dhan oo wareeg ah, oo ay ku jiraan wareegyada caafimaadka qaba, ay damiyaan.
Xaaladahan, isticmaalka RCD-yada iyo MCB-yada koox ahaan waxay ka soo horjeedaa dhinacyo gaar ah oo IET's 17th Editions Xeerarka Xadhkaha goosashada.Gaar ahaan, Cutubka 31-Qaybta Rakibaadda, Xeerka 314.1, kaas oo u baahan rakibid kasta in loo qaybiyo wareegyada hadba loo baahdo -
1)In la iska ilaaliyo khatar haddii ay cilad timaado
2) Si loo fududeeyo kormeerka badbaadada leh, tijaabinta iyo dayactirka
3)In la tixgeliyo khataraha ka iman kara fashilka hal wareeg tusaale ahaan wareegga iftiinka
4) Si loo yareeyo suurtagalnimada safarka aan la rabin ee RCD-yada (maaha cillad awgeed)
